Casters
- The standard caster comes with an 8” diameter wheel and a spigot which sleeves neatly into a scaffold pipe.
- The wheel has a simple thumb brake.
- This allows adjustment of the height of your rolling riser from about 16 ½ ” upwards.
- Used in conjunction with the flanged leg system you can effectively create rolling risers of any size or shape.
- Smaller casters are also offered, to create 12” rolling risers.
| Carrying Weight |
Load Capacity |
| 8 lbs |
2,000 lbs |
Corner Casters
- For easy maneouvre of platform stacks.
- The corner caster comes with a heavy duty steel plate, a 4” diameter wheel and a spigot which slides neatly into the corner post of the platform.
| Carrying Weight |
Load Capacity |
| 5 lbs |
2,000 lbs |
Moveable Handrail Post
- This is the same construction as the Steeldeck® corner post, but it is supplied with a backplate, so that it can be bolted in any position along the edge of the platform.
- It provides a socket for the addition of sections of pipe to construct piperail along the perimeter of the platform, at custom heights.
| Carrying Weight |
Load Capacity |
| 4 lbs |
2,000 lbs |
Bolt-On Corner Post
- This is the same construction as the Steeldeck® corner post, but it is supplied with a backplate, so that it can be bolted in any position along the edge of the platform.
- It provides an additional leg position where the platform has to cantilever to clear an obstruction.
| Carrying Weight |
Load Capacity |
| 4 lbs |
2,000 lbs |
Cleva Shoe
- Cleva Shoes are used to facilitate the construction of seating tiers.
- They attach to the platform, and capture the 'piggy-backed' leg of the platform above.
Bridging Joint
- A bridging joint allows two sections of Steeldeck® to be constructed to create a larger span than normal, and negates the need for legs in the center.
- They are used at low heights, where center downpoints are unattainable.
